The battery is a crucial component of an electric vehicle. Due to market competition pressure, some manufacturers choose inferior batteries to reduce costs, resulting in various problems after about half a year of use, such as a significant reduction in cruising range, inability to fully charge, and failure to reach normal speed after charging. We cooperate with high-quality battery suppliers, select high-quality batteries, and conduct strict inspections on each battery before leaving the factory to ensure that its performance meets the product standards. At the same time, we provide a comprehensive warranty service for batteries, allowing users to have no worries.

Appearance Inspection: Check whether there is any damage, deformation, or liquid leakage on the battery casing. If there are cracks in the casing or electrolyte leakage, it will affect the battery's performance and safety, indicating that the battery may be damaged. At the same time, check whether the positive and negative terminal posts of the battery are rusty or corroded. If so, it will lead to poor contact and affect the charging and discharging of the battery.
Charging Situation: A good battery can generally charge to a certain amount of power within the specified time during charging, and there will be no abnormal situations such as overheating, excessive or too short charging time. If the battery shows that it is fully charged quickly during charging but has a short usage time, or it cannot be fully charged after a long time of charging, there may be problems with the battery. For example, the normal charging time for a lead-acid battery is generally about 6 to 8 hours. If it is fully charged in 2 to 3 hours, it is very likely that the battery has aged and its power storage capacity has decreased.
Discharge Test: You can observe the battery's discharge situation by riding the electric vehicle. Ride at a stable speed on a flat road and observe the power display. If the power drops too quickly, or the driving mileage of the electric vehicle is significantly shortened, it indicates that the battery's performance may have deteriorated. For example, a new battery can travel about 50 to 60 kilometers when fully charged, but after being used for a period of time, it can only travel about 30 kilometers. And if other influencing factors are excluded, there may be something wrong with the battery. In addition, professional discharge equipment can also be used to conduct a discharge test on the battery, measure its discharge capacity and voltage change, and more accurately determine the battery's performance.
Battery Voltage Detection: Use a multimeter to measure the op

The cruising range of an electric vehicle is affected by various factors. For example, riding habits (frequent rapid acceleration and sudden braking), road conditions (uphill slopes, sections with frequent stops and starts), temperature (low temperatures can reduce battery performance), vehicle load (carrying passengers or heavy loads), and whether additional power-consuming devices are turned on (such as long - term use of headlights and horns). When we advertise the cruising range, the data is obtained under standard test conditions. In order to help users achieve the advertised cruising range as much as possible, we recommend maintaining good riding habits, traveling on flat roads as much as possible, avoiding overloading the vehicle, and paying attention to keeping the battery warm in low-temperature environments. At the same time, we are constantly researching and developing new technologies to enhance battery performance and the energy efficiency ratio of vehicles, so as to improve the actual cruising range.